Power Station and Cable for AirSense™ 10
A really useful battery kit for your AirSense device which allows you to use your device wherever you go without access to a plug or power source. The battery and DC cable work to give you approximately 10-14 hours of use (based on the HumidAir humidifier and ClimateLine Air heated tube not being connected). It's very lightweight and easy to travel with.
Please note this is designed for powering your AirSense 10/AirCurve device without the HumidAir attached;
Make sure you have the correct power supply unit to recharge the battery, scroll down for further information.
Important, the ResMed Power Station (RPSII) battery is not validated for recharging using the latest version of Power Supply Unit (PSU) provided with AirSense 10 devices. If your AirSense 10 device is powered by the new PSU version, you need an older version to recharge the RPSII battery. You can purchase the old version here.
How do I know if I have the new or the old PSU?
- The cord on old version has a straight strain
- The cord on the new version has a right angle strain
The Power Station and cable kit contains the following 2 components:
- RPSII: The ResMed Power Station II (RPS II) is an all-in-one external battery that enables operation of compatible ResMed devices where mains power is not available, and provides back-up power in case of an unexpected mains power failure. Please note can only be recharged via Mains Power. The lithium-ion battery provides approximately 10-14 hours of continuous operation when the target device is used without a humidifier. If using the RPSII to run the device, humidifier and heated tube together, the run time is considerably shorter and could be limited to approximately 3 hours. For detailed information on Battery Run Times, click here. For full information on the RPSII, click here
- RPSII DC Cable AirSense 10 AutoSet: For use with ResMed AirSense 10/AirCurve in conjunction with RPSII. Connects the device to the battery. Click here for more details
- PSU Adaptor for AirSense 10: For use with ResMed AirSense 10/AirCurve in conjunction with RPSII. Connects to your PSU to allow recharging of the RPSII. Click here for more details
Please be advised that to maintain the life span of the RPSII battery, it requires regular recharging, at least every three months.
For further information, please click on the appropriate link below:
Battery/device compatibility and battery run times
Technical Specifications
|
Battery Type |
Lithium-ion |
|
Recharge time |
<4 hrs from fully empty to full charged |
|
Battery run time |
refer to Battery/device compatibility information above |
|
Dimensions (LxWxH) |
230 x 126 x 26mm |
|
Battery weight |
0.9kg |
|
Power supply |
Input range 100-240V, 50-60Hz, 0.5-1.5A. Nominal for aircraft use 110V, 400Hz |
|
Battery output voltage |
(24V/26V) ± 1V, 90W continuous |
|
Power supply unit output current (rated) |
3.75A |
|
Battery output current (rated) |
3.75A/3.46A |
Toimitus
- Toimitusaika 3 - 7 arkipäivää
- Toimitetaan valitsemasi toimitustavan mukaan joko PostNordin toimipaikkaan tai kotiin.
- Saat tekstiviesti-ilmoituksen kun paketti on noudettavissa
- Tilauksen tekemisen jälkeen tilauksen peruuttaminen tai muuttaminen ei ole mahdollista
Palautus
- Palautusaika on 14 vrk toimituksen vastaanottamisesta
- Palautuksen lähettäminen on ilmainen
- Palautusehtomme löydät täältä
Jos sinulla on kysyttävää voit olla yhteydessä asiakaspalveluumme info@resmed.fi
